* Specification

Monitor and Measurement Server Safety Specifications
The PLUS monitor together the BPM-700M its module comply with the Medical Device Directive 93/42/EEC.

1.1 Monitor Physical Specifications

Size(WxDxH)
240mm x 170mm x 225mm(9.45" x 6.69" x 8.86")
Weight(kg)
About 5.8kg(with Battery and module)


1.2 Power Specifications


Power Requirements: 100-240VAC, 50/60Hz, about 48W
Power Fail Protection


1.3 Battery Specifications: Sealed Rechargeable Battery(12V2Ah)


Operation Time: about 1 hour
Charge Time(after connection to AC power): about 15 hours


1.4 Monitor Performance Specifications


Display
6.4"(diagonal) active color TFT LCD
Resolution: 320 x 240 pixels
4 traces(ecg, SpO2, Ibp, Respiration trace)

Indicators
Alarms (red LED, 2 mode and 3 different alarm tones)
Alarms off (crossed bell display)
Battery On (yellow LED)
AC Power (green LED)
Low Battery Status (message display and sound)
QRS tone or SpO2 modulation tone
Information Sound
Inferface


1.5 Module Link between Monitor and Module


Ethernet(Central or printer)
Nurse call
ECG Output/Marker Inpet

Diaplay Speed
ECG, SpO2, IBP: 12.5mm, 25mm, 50mm
Respiration: 3.125mm, 6.25mm, 12.5mm

Trends
Short term trend: 1 hour with 1 minute resolution
Middle term trend: 6 hours with 10 minutes resolution
Long term trend: 24 hours with 30 minutes resolution

Event
8 Events are stored
Rotary Key operation


Module Specifications

1.1 Module Physical Specifications

Size(WxDxH)
217mm x 122mm x 65mm(8.54" x 4.80" x 2.56")
Weight(kg)
About 950(kg)

1.2 Battery Specifications: Sealed Rechargeable Battery(12V2Ah)


Operation Time: about 1 hour
Charge Time(after connection to AC power): about 15 hours


1.3 Module Environmental Specifications

Temperature range
Operating: 10 to 45 °C (50-113°F)
Storage: -20 to 60 °C (-68~140°F)

Relative Humidity Range
Operating: 95% RH max.
@40°C(104°F)(without condensation)
Storage: 10~95%RH max. @ 50°C(122°F)

Atmospheric pressure Range
Operating: 70~106 kPa


1.4 ECG Specifications


Lead
3 leads: I, II, III, CAL
5 leads: I, II, III, aVR, aVL, aVF, V, CAL-option

Heart Rate
Adult range: 30 to 300 bpm
Neonate / pediatric range: 30 to 400 bpm
Accuracy: ±3 bpm in whole detectable range
Resolution: 1 bpm
Adjustment: 5 bpm steps

Input Impedance
Greater than 5 M ohm

Input circuit Current
Less than 50 uA

Baseline Recovery Time
Less than 5 seconds after defibrillation

Input Signal Range
±5mVpeak (DC offset:±300mVpeak)

Calibration
Signal: 1 mVp-p
Accuracy: ±10%

Bandwidth
Monitoring Mode: 0.5 to 35Hz
Filter Mode: 0.5 to 20Hz

Limit Alarms
Adult/pediatric/neonate range: 30 to 300 bpm
Accuracy: ±3bpm in whole detectable range
Resolution: 1 bpm
Adjustment: 5 bpm steps

Brady Alarm-Plan
Alarm range: 15 to 100 bpm

Tracy Alarm-Plan
Alarm range: 10 to 250 bpm


1.5 RESP Specifications

Bandwidth
0.2 to 3 Hz(-6dB)

Respiration Rate
Adult/pediatric/neonate: 0 to 120 bpm
Accuracy: ±2bpm @ 0 to 120 bpm
Resolution: 1 bpm

Respiration Limit Alarms
High range: Adult/pediatric/neonate: 5 to 120 bpm
Low range: Adult/pediatric/neonate: 0 to 115 bpm
Adjustment: 5 bpm step for whole detectable range

Apnea Alarm
Delay Range: 10 to 40 seconds
Adjustment: 5 seconds steps


1.6 SpO2 Specifications

Measurement Range
20 to 100%SpO2
Accuracy: 70%~100SpO2: ±2%SpO2
50%~69SpO2: ±3%SpO2
20%~49SpO2: nuspecified
Resolution: 1% SpO2

Limit Alarms
High range: 25 to 100% SpO2
Low range: 20 to 95% SpO2
Adjustment: 5% SpO2 step

Pulse rate Measurement Range
Adult/pediatric/neonate: 30 to 300 bpm
Accuracy: ±3 bpm in whole detectable range
Resolution: 1 bpm
Adjustment: 5 bpm steps


1.7 NBP Specifications

Cuff Inflation Rate
3 to 18 seconds

Auto mode repetition
2, 5, 10, 15, 30, 60, 120 minutes

Measurement Time(Typical at HR > 60 bpm)
25 seconds

Accur